Sensor of TI millimeter wave: Brim intelligence melt into is own the factory provides power
[introduction] arrive from traditional industrial robot system current and newest cooperation robot, of all kinds robot relies on the sensor that can be generated and processes data of many height change. These data can be used at enabling to be able to make the own robot with decision-making real time, come true thereby more incident management of intelligence, maintain productivity in dynamic real environment at the same time.
Arrive from traditional industrial robot system current and newest cooperation robot, of all kinds robot relies on the sensor that can be generated and processes data of many height change. These data can be used at enabling to be able to make the own robot with decision-making real time, come true thereby more incident management of intelligence, maintain productivity in dynamic real environment at the same time, if pursue,1 is shown.
Graph 1: Millimeter wave (MmWave) pass feeling conduce to monitoring machine all round area, realize real time incident to manage
If why sensor of TI millimeter wave realizes advanced intelligence to change in the factory
Heart state apparatus (TI) millimeter wave (MmWave) sensor can use compositive processor to handle piece on data, in order to realize real time decision-making. With certain the sensor photograph that is based on light or vision is compared, this kind of compositive implementation more small-sized design. In addition, use individual sensor to detect only many objects and the ability that process data can reduce integral system cost.
Element of serious to another in factory environment consideration is the immunity of the ambient conditions such as pair of dirt, aerosol and alterable illume. Millimeter wave sensor can be in any move below these conditions – install outer casing plastic from the back – need not exterior lens, aperture or sensor surface. All these attribute make millimeter wave sensor conducts the show in feeling application in industry good.
TI MmWave sensor encloses aerial to evaluate module→Begin your design
Sensor of TI millimeter wave not only measurable distance
Intelligence changes brim processing to allow factory machine and robot and person alternant, reduce accident happening. For example, can configure sensor of TI millimeter wave to come the specific and relevant section all round monitoring machine, definition forbidden zone, issue a warning to the personnel inside area. Can have partition to these area, make sensor can be based on area to take up circumstance or personnel are close to spend and make corresponding response accordingly. Graph 2 demonstrated this function, among them green area represents security; Maize area expresses to warn, and gules area represents risk, make clear be close to a machine.
Graph 2: Personnel delay don’t go yet crosses a machine, danger signal twinkles in 1 meter of place
Sensor of TI millimeter wave can measure the interval of the object in eye shot accurately not only, measurable still the relative speed of any fraise. This makes the rate that the robot can approach sensor according to the object adopts more to forecast a movement, if stop a machine. It is dangerous that the graph shows the speed of the personnel that is close to a machine for machine basis 3 times to spark area is admonitory speed.
Graph 3: When one individual don’t go yet, dangerous mark sparks in 1 meter of place (A) ; When a person goes quickly, dangerous mark sparks in 2 meters of place (B)
To improve productivity, you hope the machine avoids to spark because of the mistake and stop. Graph 4 medium give typical examples are shown for compositive dog how does algorithm make sensor determines personnel direction well and truly. When someone leaves a machine, it won’t open admonitory signal, also won’t take other action.
Graph 4: Sensor does not indicate danger signal, because someone is leaving a machine
Simplify to the robot is designed and accelerate development rate
To simplify the design of robot system shortens development time, the area scanner that visits us please exemple Cheng. Its characteristic was to add static object check newly to calculate a standard, can detect the static target that remains possibly inside ” of robot “ forbidden zone, for example box, barrow or other equipment, oversight is permanent at the same time static object, already may become setting for example the post of one part. This Cheng evaluates module in IWR6843ISK of TI millimeter wave, IWR6843ISK-ODS and IWR6843AoP (EVM) on move.
A God that uses us line (AOP) sensor, its feature is radio frequency (RF) aerial etchs a mount of chip, compare with photograph of other radar technology, can save the circuit of 75% board area, help you design the system with a smaller bulk thereby, if pursue,5 are shown.
Graph 5: Use TI millimeter wave encloses aerial sensor, narrow sensor bulk be as high as 75%
Other natural resources
- Download “Make appliance has compositive the reference of area scanner ” of the millimeter wave sensor that encloses aerial is designed
- Read white paper “ Piece God how does line design simplify the millimeter wave feeling in building and factory is measured”
- Read white book, “How does the sensor of 60 GHz MmWave that understands 24 GHz above come true more industrial application of intelligence. ”
- Understand millimeter wave sensorDefend in safety the advantage in application.
- In white paperHow does sensor data provide power for the AI in the robotIn, the more information of sensor of the millimeter wave in understanding concerned intelligence robot.
Avoid duty statement: The article is reprint an article, reprint this article purpose to depend on passing more information, the person that copyright puts in original work ‘s charge is all. If involve work copyright issue,article place uses video, picture, written language, contact please small make up undertake handling.